Inspection fixtures designed from the part's datum scheme and GD&T, so dimensional checks are fast, consistent and close to production.
A checking fixture turns a drawing's datum structure into physical hardware. It locates the part exactly as the design intent defines, then gives inspectors a quick way to verify profiles, hole positions and trim lines.
We design checking fixtures and gauges from customer part data and inspection plans, manufacture the components in-house and verify the fixture before it leaves our facility.
Fixture locating derived directly from the part drawing's datum reference frame and GD&T callouts.
Check points for flush and gap, profile, hole position and trim edges, using templates, feeler checks, pins and dial-gauge stations.
Go/No-Go pins, plug gauges, receiver gauges and feature gauges for fast attribute checks.
Fixtures can be designed with reference features so they can also be used on a coordinate measuring machine.
Base, blocks and locators machined in-house and assembled to the design model.
Check-point identification and usage instructions agreed with the customer's quality team.
Part drawing & inspection plan review
Datum & check-point strategy
3D fixture design
Customer approval
Detail drawings
Machining
Assembly
Fixture verification
Dispatch
Technical illustrations. Photos of PK Industries projects are published only with customer approval.
The fixture must follow the same datum scheme used in design and production, or the results will not correlate.
The fixture's own accuracy needs to be a small fraction of the part tolerance; this is agreed with the customer's quality team per project.
Clamping order, check-point access and clear labelling keep inspections quick and repeatable between operators.
Fixture verification and any third-party certification requirements are confirmed at the RFQ stage.
The part's 3D model, the released 2D drawing with GD&T, the inspection plan or check-point list, and any customer gauge standards.
Yes, if specified. We can add reference features so the fixture can sit on a CMM table and be measured within the same datum system.
Inspection and verification documents are agreed per project. Tell us your requirement in the RFQ, including whether you need third-party verification.
Let's turn your engineering requirements into precision-manufactured solutions.